CHANGSHA SUPMETER TECHNOLOGICAL CO.,LID
CHANGSHA SUPMETER TECHNOLOGICAL CO.,LID. BEING SUPER IN METER BEING PERFECT IN SERVICE
Add to Cart
EMC design with high anti-jam for industrial environment.
6 LED/VFD digital tubes for English&digit display.
64-segment LED for percent display.
24-bit ∑-△ADC with internal resolution 1/1,000,000.
High sampling frequency 200Hz.
Special Anti-vibration Digital Filtering Algorithm for precise weighing, stable display and rapid response.
Auto Zero Tracking.
Load Calibration &, Data Calibration.
The Weighing Record can be printed.
Definable AO/COM[Communication Port].
Power Supply: AC220V±15%, 50/60Hz, Max. 10W.
Loadcell Excitation Voltage/Current: DC10V/250mA.
8 Loadcells[350Ω] connectable.
Weighing Signal Input Range: 0~25mV.
3 Normally Open Switch Inputs [DI].
4 Normally Open Relay Outputs [DO]: AC250V/DC24V, 1A.
1 Analog Signal Output [AO]: 4~20mA, 0.05%FS.
Accuracy Grade: III.
COM1: Fixed RS232&RS485. Free to use one of them.
COM2: Optional RS232/RS485/RS422/Profibus-DP/Ethernet.
Connect Host IPC, Remote Display, Printer&Wireless Module.
Outline Size [W×H×D]: 160 × 84 × 188 mm.
Panel Cut-out Size [W×H]: 151 × 76 mm.
Operating Temperature: -25℃~+45℃.
Protection Level of Front Panel: IP65.
Verification Accuracy: 0.02%.
Static Weighing Accuracy: 0.2%~0.5%.
Outline Size: 202×305×90mm [W×H×D]
Mounting Size: 169×271mm [W×H]
Mounting Hole Size: Ф9mm.
|
Key Name
|
Description
|
||
|
[MENU]
[ESC]
([LOCK])
|
Enter Main Menu.
Exit. Keep it pressed for 2 seconds: Key-locking / Key-unlocking. |
||
|
[ENT]
|
Enter/Save/Alarm Acknowledge.
|
||
|
[◄]
|
Cursor shifts left.
|
||
|
[►]
|
Cursor shifts right.
|
||
|
[▲]
|
Display the previous option.
Digit input: +1. |
||
|
[▼]
|
Display the next option.
Digit input: -1. |
||
|
[G/N]
|
APL0 Hopper Weighing Mode: Gross Weight / Net Weight display switch.
|
||
|
APL1 Ration Feeding/Batching Mode: Gross Weight / Net Weight / Feeding Weight display Switch.
[A./b./c.]: Feeding Weight of Material M1/M2/M3. [t.]: Total Feeding Weight. |
|||
|
[ZERO]
|
[-ZEro-]: Zero Calibration with Power-down Protection and Clearing Tare Weight.
[≡ZEro≡]: Zero Fine Adjustment without Power-down Protection and without Clearing Tare Weight. The controller will switch to Gross Weight display. |
||
|
[TARE]
|
[≡tArE≡]: Manual Tare without Power-down Protection.
[-PStr-]: Preset Tare Weight with Power-down Protection. [-rStr-]: Clear Tare Weight with Power-down Protection. The controller will switch to Net Weight display. |
||
|
[CAL]
|
[-LoAd-]: Load Calibration.
|
||
|
[▲][▼]*
|
* Keep it pressed for 2 seconds: Setpoint parameters setting.
|
||
|
[PRINT]
|
Print Weighing/Batching Report.
|
||