EMC design with high anti-jam for industrial environment.
DC24V power input with reverse polarity protection.
Cortex-A8 CPU with 600MHz Clock, 128M Flash.
7” [800×480] or 10.2” [1024×600] TFT touch panel.
24-bit ∑-△ADC with internal resolution 1/1,000,000.
High sampling frequency 800Hz.
Special Anti-vibration Digital Filtering Algorithm for precise weighing, stable display and rapid response.
Auto Zero Tracking.
Load Calibration and Loss Calibration.
Fall Value Auto Correction.
Auto Re-feed for Negative Deviation Alarm.
Target Batch Count Control.
Auto Pause for Gross Weight Upper Limit & Deviation Alarm.
‘Manual Pause’ Operation.
2-speed[high/low] feeding control by DOs or AOs.
Definable DI/DO/AO/COM[Communication Port].
Recipe Number: 100.

Data Display & Quick Setting

Name	Description	Authorization
[NET]	Real-time Weight / Material Mn’s Feeding Weight [Weight Unit].
[LOSS]	Dumping Weight.
[GROSS]	Gross Weight.
[HI]	Gross Weight Upper Limit Alarm.
[Cycles]	Batch Count.
[▲]/[HI]	Up Tolerance Alarm.
[▼]/[LO]	Low Tolerance Alarm.
[Lack]	‘Lack of Materials in Feeding Hopper’ Alarm.
[Total]	Total Totalized Weight.
[Dumping Mode]	Dump Separately / Dump Together / Ration Dumping [Loss-in-weight]. Refer to parameter [315] ‘Dumping Mode’.	Administrator

[RUN]	Auto Running state.
[PAUSE]	Pause state.
[ZERO]	Gross Weight ≤ Non-load Zero Range.
[STAB]	Weight is stable.
[FED]	Material Mn Feeding Ended.
[AU_FALL]	‘Fall Value Auto Correction’ Permission.
[ALL_FED]	All Materials Feeding Ended.
[BAT_CON]	‘Batch Target Control’ is allowed. Refer to parameter [301] ‘Batch Target Control’ and [203] ‘Batch Count Target’.
[BAT_FIN]	Batch Count Target Finished.
[MIX]	The mixer is running.
[BELT]	The mixing conveyor is running.

[Recipe]	‘Working Recipe No.’ Setting.	All Users
[Recipe]	Recipe Parameters Setting.	Engineer
[Mn Target]	Mn Target Weight.
[Mn Final]	Material Mn’s Final Feeding Weight.
[Sum Target]	The sum of the Target Weight of all the materials selected for batching.
[Sum Final]	The sum of the Final Feeding Weight of all the materials selected for batching.
[Cycles Target]	Batch Count Target.
[Cycles Final]	Batch Count.
[Time]	Date&Time.
Ration Dumping [Loss-in-weight] Mode
[Dump Cycles]	Ration Dumping Batch Count.
[Dump Target]	Ration Dumping Target Weight.
[Final]	Final Dumping Weight.
[Dumped]	Ration Dumping Ended.

Terminal Diagram

Product Tags:

batch weighing controller

scale converter

programmable weighing controller

Inquiry Cart 0